Blog - Iran Chemical Mine

21 Aug HOT

Calcium carbonate in oil drilling

Calcium carbonate in oil drilling Oil and gas drilling includes many complex operations in which calcium carbonate and various other minerals play an important role. Normally, natural minerals (barite and calcium carbonate) are used in oil and gas drilling as additives to the fluids used in the step Drilling and cementing are used. Application of calcium carbonate in oil drilling is mainly used as a plutonium agent. A mixture of pre-designed particle sizes is added to the drilling fluid. [...]

By admin Blog 0 Comments Read more...

21 May HOT

Ammonium Sulfate in Fertilizers

Ammonium sulfate in fertilizers a substance that is mainly used as a chemical and synthetic fertilizer. Ammonium Sulfate fertilizer is used to reduce the alkalinity of alkaline soils. The mechanism of action is that when this fertilizer is added to moist alkaline soil, it releases ammonium ions. This causes the production of a small amount of acid and the reduction of soil pH. Also, the nitrogen of Ammonium Sulfate helps plant growth. This substance causes the leaves of plants [...]

By admin Blog Ammonium Sulfate 0 Comments Read more...

12 Nov

Silica SiO2 Applications

Silica SiO2 Applications development and has been one of the basic raw materials supporting the industrial revolution (as refractory, flux and foundry sand) and today’s information technology revolution (providing the raw material for silicon chips). This material is used in a wide range of industries, the main of which are glass, foundry, construction, ceramics and chemical industries, and in its best form. it is used for paints, plastics, rubber, and silica sand is used in water purification and agriculture. [...]

By admin Blog 0 Comments Read more...

16 Oct

MgCl2 Magnesium Chloride applications

MgCl2 Magnesium chloride applications as a natural salt that can be collected from coastal deposits and lakes. In its pure form, MgCI2 can be recognized as a powdery, odorless and colorless element that has a bitter taste. This compound dissolves easily in water and is mostly found in the hydrated state because it readily absorbs moisture from the air. Dust control on unpaved roads When the humidity is more than 32%, magnesium chloride will absorb water or moisture in the air [...]

By admin Blog, دسته‌بندی نشده 0 Comments Read more...

10 Oct

Oxidized Bitumen 115/15 Industrial Uses

Oxidized bitumen 115/15 Industrial uses are especially in chemicals, fuel, paint, varnish, alcohol varnish, paper, textile processing, road construction, paving, repairing cracks in repair and rehabilitation works, civil works, roofing, construction industries, sealing and Insulation of buildings, glue, building materials, bonding materials, coating, insulating and impregnating agents, rubber and plastic products are used. Oxidized Bitumen 115/15 Industrial uses and properties Because of its high temperature, oxidized bitumen 115/15 industrial uses for production and consumption in isolation. This type of bitumen is [...]

By admin Blog 0 Comments Read more...

Hydrated Lime, Using, Benefits,Safety Guidelines

17 Sep

Hydrated Lime Guidelines

Introduction Hydrated Lime, Guidelines for calcium hydroxide, which is a versatile material that has been used for centuries in various industries. Created by adding water to quicklime (calcium oxide), it has a fine, white powdery texture and is known for its strong alkaline properties. From construction to water treatment, hydrated lime plays a vital role in many processes, thanks to its chemical reactivity. This article explores the applications, benefits, and safety precautions associated with using hydrated lime. Applications of Hydrated Lime Construction [...]

By admin Blog 0 Comments Read more...

28 Apr

Bitumen 60/70 Penetration Test Method

Bitumen 60/70 Penetration Test Method Bitumen 60/70 Penetration Test Method is: heat bitumen 60/70 to about 60 degrees or to a temperature higher than the softening point and then pour it into a special container. This container has a diameter of 5.5 cm and a height of 3.5 cm. It should be ensured that the bitumen 60/70 surface is completely smooth and without bubbles. A spatula can be used to smooth the bitumen surface. We expose the container containing the [...]

By admin Blog 0 Comments Read more...

16 Apr

What is Texapon?

What is Texapon? Texapon is in the form of jelly and its uses are in health products. Texapon belongs to the family of acyl ether sulfates and is the result of combining a fatty alcohol with ethylene oxide and sulfonation. Texapon has other names that are sometimes called by those names. These names are sodium dod kano sulfate, sodium lauryl sulfate, sodium dod sil sulfate. Texapon is a very useful chemical that exists in different concentrations of 30% and 70%. [...]

By admin Blog Texapon 0 Comments Read more...

14 Apr

LABSA storage and Preventive measures

LABSA storage and Preventive measures LABSA or Sulfonic acid is a very strong acidic substance, LABSA should be handled, stored and exposed to this substance; Necessary standard measures should be followed. If you use pipes in your workplace to move LABSA (Sulfunic acid), these pipes must have high strength. When these pipes are exposed to air, they must have sufficient resistance against the corrosive effects of this colorless acid. In addition, LABSA can irritate some parts of the body [...]

By admin Blog LABSA 0 Comments Read more...

02 Apr

Ferric Chloride for water and waste water treatment

Ferric Chloride for water and waste water treatment Ferric Chloride by FeCL3 formula is one of the few effective compounds in the water and wastewater treatment industry, which accelerates the sedimentation process, and compared to other similar products, according to its characteristics and analysis, Ferric Chloride is also quite effective in removing the smell and taste of water. Another advantage of Ferric Chloride is that there are no health problems and no restrictions. This case of aluminum sulfate is known [...]

By admin Blog 0 Comments Read more...