admin - Iran Chemical Mine

21 Aug

Calcium carbonate in oil drilling

Calcium carbonate in oil drilling Oil and gas drilling includes many complex operations in which calcium carbonate and various other minerals play an important role. Normally, natural minerals (barite and calcium carbonate) are used in oil and gas drilling as additives to the fluids used in the step Drilling and cementing are used. Application of calcium carbonate in oil drilling is mainly used as a plutonium agent. A mixture of pre-designed particle sizes is added to the drilling fluid. [...]

By admin Blog 0 Comments Read more...

21 May

Ammonium Sulfate in Fertilizers

Ammonium sulfate in fertilizers a substance that is mainly used as a chemical and synthetic fertilizer. Ammonium Sulfate fertilizer is used to reduce the alkalinity of alkaline soils. The mechanism of action is that when this fertilizer is added to moist alkaline soil, it releases ammonium ions. This causes the production of a small amount of acid and the reduction of soil pH. Also, the nitrogen of Ammonium Sulfate helps plant growth. This substance causes the leaves of plants [...]

By admin Blog Ammonium Sulfate 0 Comments Read more...

28 Apr

Bitumen 60/70 Penetration Test Method

Bitumen 60/70 Penetration Test Method Bitumen 60/70 Penetration Test Method is: heat bitumen 60/70 to about 60 degrees or to a temperature higher than the softening point and then pour it into a special container. This container has a diameter of 5.5 cm and a height of 3.5 cm. It should be ensured that the bitumen 60/70 surface is completely smooth and without bubbles. A spatula can be used to smooth the bitumen surface. We expose the container containing the [...]

By admin Blog 0 Comments Read more...

16 Apr

What is Texapon?

What is Texapon? Texapon is in the form of jelly and its uses are in health products. Texapon belongs to the family of acyl ether sulfates and is the result of combining a fatty alcohol with ethylene oxide and sulfonation. Texapon has other names that are sometimes called by those names. These names are sodium dod kano sulfate, sodium lauryl sulfate, sodium dod sil sulfate. Texapon is a very useful chemical that exists in different concentrations of 30% and 70%. [...]

By admin Blog Texapon 0 Comments Read more...

14 Apr

LABSA storage and Preventive measures

LABSA storage and Preventive measures LABSA or Sulfonic acid is a very strong acidic substance, LABSA should be handled, stored and exposed to this substance; Necessary standard measures should be followed. If you use pipes in your workplace to move LABSA (Sulfunic acid), these pipes must have high strength. When these pipes are exposed to air, they must have sufficient resistance against the corrosive effects of this colorless acid. In addition, LABSA can irritate some parts of the body [...]

By admin Blog LABSA 0 Comments Read more...

02 Apr

Ferric Chloride for water and waste water treatment

Ferric Chloride for water and waste water treatment Ferric Chloride by FeCL3 formula is one of the few effective compounds in the water and wastewater treatment industry, which accelerates the sedimentation process, and compared to other similar products, according to its characteristics and analysis, Ferric Chloride is also quite effective in removing the smell and taste of water. Another advantage of Ferric Chloride is that there are no health problems and no restrictions. This case of aluminum sulfate is known [...]

By admin Blog 0 Comments Read more...

27 Mar

Quicklime and Hydrated lime differences

Quicklime and Hydrated lime differences We call quicklime “slaked lime” because we produce it by thermally decomposing limestone, and we call hydrated lime (calcium hydroxide) “slaked lime” because when we make it by combining quicklime with water, the product It is obtained dry. The main difference between quicklime and hydrated lime is that quicklime contains calcium oxide while hydrated lime (slaked lime) contains calcium hydroxide. Although hydrated lime and quicklime are both calcium compounds, they differ in many ways. The [...]

By admin Blog 0 Comments Read more...

25 Mar

Ethyl Acetate VS Methyl Acetate

Ethyl Acetate VS Methyl Acetate Ethyl Acetate VS Methyl Acetate, describing as: the key difference between ethyl acetate and methyl acetate is that methyl acetate has a methyl group attached to an acetate group whereas ethyl acetate has an ethyl group attached to an acetate group. Ethyl acetate is an acetate ester formed between acetic acid and ethanol. It acts as a polar aprotic solvent. Methyl acetate and ethyl acetate are two chemicals that are used in various industries. These [...]

By admin Blog 0 Comments Read more...

24 Mar

Bentonite API 14A Drilling Grade

Bentonite API 14A Drilling Grade Bentonite soil is most commonly used in drilling oil and gas wells. Bentonite is used as a lubricant for liquids and cooling of drills in order to protect them against wear. Bentonite creates a type of hydrostatic pressure in oil and gas wells that prevents gas penetration. Also, drilling bentonite causes the transfer of drilling waste to the surface of the liquids in the well and facilitates its exit from the well when the cleaning [...]

By admin Blog 0 Comments Read more...

18 Mar

Asia mineral bitumen

Asia Mineral Bitumen Asia Mineral bitumen or Gilsonite exist in some Asian countries mine. These mines exist in Iran, and Iraq. Iran mines are active and supplying market by different ash grades of mineral bitumen by lumps or powder, according to the end user order. Asia Mineral Bitumen has ash grades from 0-25%. Iran Chemical Mine offering the best quality mineral Bitumen or Gilsonite, directly from its own mine and factory.

By admin Blog 0 Comments Read more...

Author - admin